| |
DESMOLDOIL P
Description
Products from the REPSOL-YPF DESMOLDOIL range are compounds formulated to act as mould release agents in various applications. They contain a selected mix of oils, which include appropriate additives and have been treated to fulfil their function.
Applications
The range of DESMOLDOIL products has been carefully analysed to guarantee compliance with our customers' demands in relation to all kinds of applications and finishes (pieces of concrete, formwork, etc.) on any kind of surface, such as wood, iron, etc.
Properties
Good oxidation resistance and storage stability.
Excellent mould release properties.
Environmentally friendly (can not be labelled).
Exceptional coverage.
Excellent finish.
Technical characteristics -
- |
- |
Desmoldoil |
- |
METHOD |
90 |
250 I |
L |
P |
Color ASTM |
ASTM D1500 |
<1 |
<1,5 |
0,5 |
0,5 |
Density @ 15 °C, g/ml |
ASTM D4052 |
0,857 |
0,865 |
0,865 |
0,865 |
Viscosity 40 °C, cSt |
ASTM D445 |
11,5 |
12 |
24 |
24 |
Viscosity 100 °C, cSt |
ASTM D445 |
3,3 |
4,1 |
4,3 |
4,3 |
Pour point, °C |
ASTMD97 |
-9 |
-12 |
-12 |
-12 |
Additives |
- |
No |
Yes |
No |
Yes |
Unless otherwise indicated, the values stated in the technical characteristics are not specifications and hould only be considered as typical.
Overview
Desmoldoil 90: bulk and 180 kg cans. Desmoldoil 250 I: bulk. Desmoldoil L: bulk. Desmoldoil P: 185kg cans.
Hazard identification
These products are not classified as toxic or hazardous according to currentlegislation.
Handling
Minimum safety precautions should be taken when using these products to avoid prolonged contact with the skin and in accordance with good industrial hygiene practices. The use of gloves, visors or glasses is recommended to avoid splashes.
Health and safety risks.
Inhalation: As this product has low volatility, the risk of inhalation is minimal.Ingestion: Do not make an affected person vomit. Supply water. Get medical help. Contact with the skin: Wash thoroughly with soap and water.Eyes: Wash thoroughly with water.General measures: Get medical help.
Fire-fighting measures
No special measures required.Extinction: Foams, dry chemicals, CO2, water spray. Do not apply a jet of water directly, as it could spread the product.
Environmental precautions
Danger of physical pollution if spilt (water, coastlines, soil, etc.) due to its floatability and oily consistency that may harm flora and fauna on contact. Prevent the material from entering thewater supply. Decontamination and cleaning: Treat as an accidental oil spillage. Avoid dispersion using mechanical barriers and remove with physical or chemical elements.
Technical Information Sheets Industrial lubricants. Rev. 1. March 06 |
|
